The Doors Band Logo
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
The Famous "The Doors" Logo Mixed Media, 3D printing and Acrylic Lasercut Long edge size 20mm Needed: Super Glue for…
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 46
- Makes
- 0
- Views
- 332
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Music
- License
- Creative Commons — Attribution
The Famous "The Doors" Logo
Mixed Media, 3D printing and Acrylic Lasercut
Long edge size 20mm
Needed:
Super Glue for Fill inserts
10 screws 3mm (any length from 8mm to 20mm)
Threaded inserts (optional)
Single block design: The Doors Band Logo One Block
Print Settings
Printer:
Creator Pro
Rafts:
No
Supports:
No
Resolution:
0.20
Infill:
20%, 5 walls
Filament:
esun PLA/PETGFire Engine Red PLA
Notes:
Print Material Weight:
±70g Main Lettering
±12g black fill inserts
Post-Printing
The main part print has slots for 3mm screw (length 12to16 mm preferred), Threaded inserts are optional
you can use the "02_Countersunk_base_3mm_screws.stl"in case you don't want lasercut the acrylic base
few drops of any good glue are enough to hold "03_Optional_fill.stl" inserts
Category: Music