1 / 3
Holder for LED-lamp - Müller-Licht
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
The original holder was lost, so I have designed a printed holder for the LED lamp.
- Rating
- 0 / 5
- Likes
- 7
- Downloads
- 27
- Makes
- 0
- Views
- 192
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution — Noncommercial
The holder is printed with PETG and do not need supports. To avoid bending force at the holder and to simplify the handling, there are screws added from each side.
Part list:
- holder | quantity: 4
- countersunk screw ⌀4x70 (for wood) | quantity: 4
Print instruction:
- supports: NO
- layer height: 0,2mm or 0,3mm
- nozzle diameter: 0,4mm or 0,6mm
- brim: not required
- enclosure: NO
Assembly instruction:
- deburr part if needed
- place the holder (2 parts) at the pocket, insert countersunk screw ⌀4x70 to the side bores with chamfer (2x)
- fix countersunk screw ⌀4x70 with caution to ensure holder do not crack
- fix lamp using the fixing bores in the holder which are suitable for countersunk screws ⌀3mm up to ⌀3,5mm
Manufacturer:
Müller Licht, Aqua-Promo 1/120, part number: 20800205