Puzzle toy for kids
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€0.47 – €0.57 net (excluding VAT)
For file: Puzzle-Cube_38m_0,20mm_205C_PLA_ENDER3NEO.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.52 excluding VAT (range midpoint).
- Weight reported by the author
- 4 g
- Print time reported by the author
- 38.4 min
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Simple 2D & 3D puzzle for kids, with dozens of possibilities.
- Rating
- 0 / 5
- Likes
- 104
- Downloads
- 369
- Makes
- 0
- Views
- 2,345
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Puzzles & Brain-teasers
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Description
Again, this model was created as a toy. This time for the daughter of a friend. It was supposed to be such a cool puzzle toy, but a puzzle with only one solution? Solved, done and ... nooo ... Pretty lame. Inspired by a wooden toy from my childhood, I created a variant for the 3D printer.
It is a 2D and 3D puzzle game consisting of four cubes, four small L-shaped blocks (2 x 2 cubes) and four large L-shaped blocks (3 x 3 cubes). Various two-dimensional patterns can be created, as well as numerous different variations of a square. The motto is: Be creative.
The base cube has a dimension of 20 x 20 mm.
The little L-shaped block has 40 x 40 mm.
The large L-shaped block is 60 x 60 mm.
Just in case:
This puzzle is not suitable for children under 3 years old.
Printing
Since it is a toy and is also designed for children, I recommend you also use 12 different colors for the most fun. For the tray I recommend a neutral color.
Since these are quite simple geometric figures, printing with 0.4 nozzle and 0.2 mm layer height is sufficient for the cubes. For the tablet, even 0.28 mm layer height is sufficient.
However, I would set the infill to at least 25% so that the blocks gain stability and weight.
Assembly
Well, that is the principle of such a puzzle toy. There are no instructions for assembly.
The task is to create a rectangular pattern from all the available bricks, or to build a cuboid from the blocks. You can see two possible solutions in the title picture, but there are dozens more.
Happy puzzles.