Thule Chariot Sport Wheel | Wall Mount (Hooks)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I made few small hooks that are mounted on a wall to hold wheels for Thule Chariot Sport stroller.
- Rating
- 0 / 5
- Likes
- 27
- Downloads
- 119
- Makes
- 0
- Views
- 1,100
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Summary
I made few small hooks that are mounted on a wall to hold wheels for Thule Chariot Sport stroller.
This makes the storage of the entire stroller a bit more tidy in a garage as the stroller is way smaller without the wheels.
Also check out my models for wall hooks made for the Thule Chariot Sport accessory.
Print Instructions
I used a following settings for the print and it turned out very well.
Print orientation: Make sure the THULE logo is on top - you might need to change the orientation of the STL file in your slicer.
Material: PLA
Slicer: PrusaSlicer
Preset: 0.2mm QUALITY
Perimeters: 4
Infill: 15-20%
Solid Layers: 4 bottom, 4 top
After the print I applied a full coating (3 layers) with a spray paint that makes a rubbery finish.
For the full set of wheels on Thule Chariot Sport (Biking, Running/Skating, City/Strolling) you will need to print following models:
- 2x - small wheel hook (city/strolling wheels)
- 1x - front wheel hook (running / skating wheel)
- 2x - back wheel hook (main wheels)
Mounting Instructions
The holes use 90deg countersink, so use screws with the same countersink angle (90deg is a standard angle in Europe).
The mounting is designed to be via wood screws into the wall using a “wall dowel” or into a wooden wall.