Office table and a stool for dolls 1/6
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€0.59 – €0.72 net (excluding VAT)
For file: Stul 840 mm v1 suplik vase_0.3mm_PLA_MK3S_37m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.65 excluding VAT (range midpoint).
- Weight reported by the author
- 9 g
- Print time reported by the author
- 36.6 min
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
(Home)office table with two vase-model drawers and a simple stool. Easy print, no supports.
- Rating
- 5 / 5
- Likes
- 135
- Downloads
- 312
- Makes
- 2
- Views
- 1,552
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Other Toys & Games
- License
- Creative Commons — Attribution
Simple, easy-to-print model for a doll house, doll room or diorama. It can make a fun toy for kids and also a stylish accessory for doll collectors and photographers.
No supports, optionally no glue - depending on whether you print the drawers or how you choose to attach your drawer handle.
For the drawer handle, for my purposes, I didn't include it in the model. Instead, you can go creative and glue on whatever you like. I used a bead attached with a wire through a hole (hole made by a pin). You can use whatever tiny thing comes across your way, or a paper clip wire… Make it yours and unique! You can also use a printed cylindre or ball, ofcourse.
Size / resolution:
I designed it in real life scale and then scaled down to 1/6, which is the size of a Barbie and similar dolls. This is tested and works well. I didn't test it on 50% for 1/12 scale yet. Please let me know if you do so, I'm curious!
Printer settings:
For small and extra enthusiastic children I recommend to print the table with 4 perimetres. This way you get 100% infill and best strength you can get.
For the stool, you can use the same principle as by table for durability.
Besides that, I recommend, to use some fun pattern for the first layer, I had great success using Octagram spiral for the stool. You can find it in your slicer settings, the infill settings in PrusaSlicer.
Print the drawers in a vase mode!
Notes to the photo:
*The shelf behind is a part of my other doll furniture project, not worth posting yet. These are more or less just simple square boxes stacked in a pillar.
*The planter you see on the photos is a model by Slimprint shrinked to 4 cm. The yucca plant is my paper craft - no printable yet, sorry.
https://www.printables.com/cs/model/39138-geometric-plant-pot-vase-mode-shelled