Thule Chariot Sport Accessory | Wall Mount (Hooks)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I made few small hooks that are mounted on a wall to hold the accessory for Thule Chariot Sport stroller.
- Rating
- 0 / 5
- Likes
- 27
- Downloads
- 150
- Makes
- 1
- Views
- 1,013
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Summary
I made few small hooks that are mounted on a wall to hold accessory for Thule Chariot Sport stroller.
This makes the storage of the entire stroller a bit more tidy in a garage as the equipment is otherwise laying all over the place.
There are two versions of the hook. One that has extra click-in spot for holding the flag used when biking.
Also check out my models for wall hooks made for the Thule Chariot Sport wheels.
You will need 2 hooks for each accessory piece (aluminium bar).
If you want a full set including the flag holder print:
- 2x - hook-with-flag-holder
- Used to hold the Bike aluminium bar & each will hold a piece of the flag.
- 4x - hook-standard
- Used to hold the aluminium bars for the front wheel used for skating/running.
Print Instructions
I used a following settings for the print and it turned out very well.
Print orientation: Make sure the THULE logo is on top - you might need to change the orientation of the STL file in your slicer.
Material: PETG
Slicer: PrusaSlicer
Preset: 0.3mm DRAFT
Adaptive layer height: (0.2 = Quality/Speed, 2 = Smoothing)
Perimeters: 4
Infill: 15-20%
Solid Layers: 4 bottom, 4 top
Mounting Instructions
The holes use 90deg countersink, so use screws with the same countersink angle (90deg is a standard angle in Europe).
The mounting is designed to be via wood screws into the wall using a “wall dowel” or into a wooden wall.