1 / 2
Gradual supports for wooden train tracks (Brio/Ikea) — image 1
1 / 2

Gradual supports for wooden train tracks (Brio/Ikea)

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Gradual support blocks for wooden train tracks.

Rating
5 / 5
Likes
38
Downloads
104
Makes
1
Views
794
Reviews
1

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial

Almost every parent (In this case mostly dads ;) ) is at somepoint stuck at building these tracks. And let's honest, the electric motor train climbs really bad. So these gradual supports enable you to build more forgiving incline.

Inspired by this reddit post: Gradual Ascent : BRIO (reddit.com)

There are two files. I call them “1” and “3”. The normal incline or a slab is 6 (about 60mm). So, if you want the easiest climb for the train you need 4 pieces of the bigger “3” piece and 5 pieces of the smaller “1” piece.

2 perimeters and 15% does the job, but you can add perimeters for stepping on incidents or more infill to get more weight.

Small supports only for built plate are needed so the little thingies I placed to to better keep the pieces together print out nicely. Parts should be oriented correctly! TSHUU TSHUU!

 

 

Tags