Flexi Squid, and Ammonite (print-in-place)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a flexi squid, an improvement on the "Squid and Ammonite Set" that I published on Thingiverse.
- Rating
- 5 / 5
- Likes
- 851
- Downloads
- 3,171
- Makes
- 26
- Views
- 11,138
- Reviews
- 25
Updated at source:
Model information
- Source
- Printables
- Category
- Animals
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives
[Update]
---2024/07/14---
Added ammonite parts. You can make your own Flexi Ammonite.
This is a flexi squid, an improvement on the "Squid and Ammonite Set" that I published on Thingiverse and Printables.
Flexi Squid & Ammonite Set by 3D_Flexseeds | Download free STL model | Printables.com
The model is completed by simply 3D printing two bodies and attaching them together.
Print in Place with no supports.
Please take pictures of your Flexi and share them with us!
3D PRINTING SETTINGS
{Recommend}
Layer Height: 0.2mm
Print Speed: 60mm/s
Outer Wall Speed: 10mm/s
Z Seam Alignment: User Specified
Z Seam Position: Back Right (or "Back Left" if you want to 3D print the model facing right)
💰Commercial Use💰
This model is not available for commercial use under "CC BY-NC-ND 4.0" below. Therefore, I am selling the upgraded model with additional detailing and a license for commercial use. If you want to sell my model commercially, please check my Cults, Etsy, and MyMiniFactory.
https://cults3d.com/en/design-collections/3dflexseeds/commercial-use-ver
https://flexseedsshop.etsy.com
https://www.myminifactory.com/users/3dflexseeds/collection/commercial-ver
On Patreon, you can purchase public commercial models at a special discount, and new releases are available for free present🎁
In addition, you can get monthly exclusive models and generous welcome pack!!
https://www.patreon.com/FlexSeeds
⚠Warning⚠
Be careful in environments with young children and pets!
This model contains small parts.
If not properly stored in an environment with young children or pets, it may lead to accidents such as accidental ingestion or injury.
If infants or pets are present, please take appropriate measures depending on the situation, such as refraining from 3D printing or storing in an appropriate place.
Do not apply strong force!
Applying strong force to a 3D printed model or throwing it may damage the model and lead to accidents such as injuries.
In addition, debris from damage to the model may be accidentally ingested by infants or pets.
If the model is damaged, dispose of it immediately.
Store them in an appropriate place.
After 3D printing, store the model in an appropriate place out of reach of young children and pets.
Proper adherence to the precautions will ensure safe use of the model.