LCD + 4" Non-HyperPixel Touchscreen Cover
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A cover to work with a non HyperPixel touch screen that requires a bit more room for the HDMI jumper from screen to PI
- Rating
- 0 / 5
- Likes
- 26
- Downloads
- 112
- Makes
- 0
- Views
- 1,891
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Public Domain
The model from Puckpuck is awesome but I needed a little more room to allow space for the little U-shaped jumper that connects the HDMI port from the touch screen to the Raspberry PI 4 I was using.
Because of the increased size of the screen and the repositioning of the PI the entire cover length was increased by 10mm. I ended up having to cut the model in half to be able to print on my Prusa MK3s. I made some 1.75mm holes where you glue together the two side to make lining up easier.
Parts list:
Screen - I had a hard time finding a HyperPixel so I opted for this cheaper version
https://www.amazon.com/gp/product/B08M62BBBL/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1
PI 4 - Probably could get away with a PI 3 but I wanted to try out a 4 😃
https://www.amazon.com/gp/product/B07TC2BK1X
Power adapter with switch - After a lot of searching for a nice 90-degree wire to connect with a buck converter, I opted for a switched wire. It is honestly really nice and pretty cleanly hidden.
https://www.amazon.com/gp/product/B08C9VYLLK/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1