Laser Alignment Mount
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€1.73 – €2.12 net (excluding VAT)
For file: laserGuide_0.2mm_PLA_MK3S_2h10m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €1.93 excluding VAT (range midpoint).
- Weight reported by the author
- 19 g
- Print time reported by the author
- 2.17 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
A simple holder that allows you to use a cheap laser pointer as an alignment tool
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 12
- Makes
- 1
- Views
- 441
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial
This is the first thing I have made and printed myself. It is intended to be used to align the transmit/receive antenna on a RF network link about 100m apart.
I needed something to mount a laser pointer onto the antenna at 90 degrees to do so. Rubber bands looped through the model hold it securely on the antenna but are easy to remove/reposition without damaging the antenna itself.