1 / 2
Stormtroopers (Galaxy's Edge) - Hueforge Print
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Stormtroopers as photographed at Galaxy's Edge, Disneyland CA.
- Rating
- 5 / 5
- Likes
- 31
- Downloads
- 65
- Makes
- 0
- Views
- 530
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Stormtroopers as photographed at Galaxy's Edge, Disneyland CA.
Print at 100% infill with a layer height of 0.04mm with a base layer of 0.16mm
Filaments Used:
- PLA Siddament Black Transmission Distance: 0.2
- PLA+ Overture Dark Blue Transmission Distance: 1.8
- PLA Overture Light Grey Transmission Distance: 1.6
- PLA META Sunlu White Transmission Distance: 9.6
Swap Instructions:
- Start with Black
- At layer #12 (0.6mm) swap to Dark Blue
- At layer #15 (0.72mm) swap to Light Grey
- At layer #19 (0.88mm) swap to White for the rest.