Ecoflow wave 2 small hose to 6" pipe sleeve part
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Hose connector from small ecoflow wave 2 hose (with another connector) to 6" pipe
- Rating
- 0 / 5
- Likes
- 8
- Downloads
- 127
- Makes
- 0
- Views
- 1,448
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Mechanical Parts
- License
- Creative Commons — Attribution
For those trying a more permanent install of the Ecoflow Wave 2. While I haven't designed the part clicking into the small Ecoflow hose I found and printed MadebyMike's EcoFlow Wave 2 Hose Takeoff: https://www.printables.com/model/521583-ecoflow-wave-2-hose-takeoff and then designed a sleeve that slips over it and on the other end slips over a 6" drain pipe I found at Home Depot: VPC 6 in. X 24 in. ABS SDR-35 Riser Pipe 6006-2 - The Home Depot It says OD is 6.25".
Put that through the wall and now I have something I can work with. See also the version that works for the large hose (https://www.printables.com/model/594349-ecoflow-wave-2-large-hose-to-6-pipe-sleeve-part )
Next I would like to just integrate the locking part to this adapter so I would have one less piece/cleaner setup. …work in progress.