1 / 3
Volvo M56 Drive Shaft Plug - 999 5488
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A simple 40mm plug to seal the Volvo M56 gearbox drive shaft holes from debris and stop gearbox oil from leaking out.
- Rating
- 0 / 5
- Likes
- 9
- Downloads
- 75
- Makes
- 0
- Views
- 508
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Automotive
- License
- Creative Commons — Attribution — Share Alike
General
A little 40mm plug with a knob to plug the drive shaft holes of a Volvo M56 gearbox (or any other transmission with 40mm diameter seals).
This can be considered a substitution for the Volvo special tool 999 5488.
Recommended Material & Print Settings
- Any material is fine, PLA was used for the plug shown in the pictures.
- ≥2 perimeters recommended, 10% or less infill is sufficient
- The part should be printable with most printers and materials without any supports.
Please consider liking the model and posting a Make. It took a lot of revisions and a lot of filament and O-rings to get this right.
