1 / 2
Graveyard Mansion (Filament Painting) - HueForge
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Filament painting made using HueForge - Filament swaps ONLY, no MMU or AMS required.
- Rating
- 5 / 5
- Likes
- 33
- Downloads
- 148
- Makes
- 6
- Views
- 699
- Reviews
- 3
Updated at source:
Model information
- Source
- Printables
- Category
- Other Art & Designs
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Graveyard Mansion - HueForge.
Printing instructions:
Filament swaps ONLY, no MMU or AMS required.
Print at 100% infill with a layer height of 0.04mm with a base layer of 0.24mm.
You can use same filaments as I did, or you can experiment with your own.
Don't forget to upload a make!
Filaments Used:
- PLA BambuLab Basic Black Transmission Distance: 0.6
- PLA BambuLab Basic Blue Gray Transmission Distance: 3
- PLA BambuLab Basic Jade White Transmission Distance: 4
Swap Instructions:
- Start with Black
- At layer #4 (0.36mm) swap to Blue Gray
- At layer #16 (0.84mm) swap to Jade White for the rest.
