1 / 2
Ghost of The Stone (Filament Painting) - HueForge — image 1
1 / 2

Ghost of The Stone (Filament Painting) - HueForge

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Filament painting made using HueForge - Filament swaps ONLY, no MMU or AMS required.

Rating
5 / 5
Likes
30
Downloads
90
Makes
1
Views
663
Reviews
2

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial — Share Alike

Ghost of The Stone (Filament Painting) - HueForge

Printing instructions:

Filament swaps ONLY, no MMU or AMS required.

Print at 100% infill with a layer height of 0.04mm with a base layer of 0.24mm.

You can use same filaments as I did, or you can experiment with your own.

Don't forget to upload a make!

Filaments Used:
  • PLA BambuLab Basic Black Transmission Distance: 0.6
  • PLA BambuLab Basic Blue Gray Transmission Distance: 3
  • PLA BambuLab Basic Beige Transmission Distance: 8
  • PLA BambuLab Basic Jade White Transmission Distance: 4
Swap Instructions:
  • Start with Black
  • At layer #6 (0.44mm) swap to Blue Gray
  • At layer #11 (0.64mm) swap to Beige
  • At layer #34 (1.56mm) swap to Jade White for the rest.

Tags