1 / 38
Installation of a Changeable Carbon Filter in the QIDI TECH X-Plus 3 3D Printer — image 1
1 / 38

Installation of a Changeable Carbon Filter in the QIDI TECH X-Plus 3 3D Printer

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

The goal of this project is to develop and install a carbon filter to improve the print quality of plastic materials

Rating
0 / 5
Likes
21
Downloads
76
Makes
0
Views
1,600
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial

FOR QIDI TECH X-Plus 3

Implementation: I have designed a filter for air purification during the printing process, which has not yet been tested in action. The filter's volume was chosen to be roughly similar to those used in Bambu printers. The filter was crafted from readily available materials, such as bolts and magnets that were on hand. In one of the photos, you can see the components used in creating the filter.

It's important to note that I designed everything with consideration for sealing all connections with 2-millimeter tape to enhance insulation.

The only caveat pertains to the openings for the fan. For some reason, QIDI used different sizes for these openings. The fan itself measures 50x50 mm, whereas the openings made by QIDI are 48x50 mm. I have already contacted QIDI about this issue, and they have indicated that they may rectify this error. Additionally, it's worth noting that with this filter, the stock filament holder position cannot be used, so it had to be modified.

 

На русском:

Реализация: Я разработал фильтр для очистки воздуха во время печати, который пока не был протестирован в деле. Объем фильтра выбран приближенно к аналогичным фильтрам, используемым в принтерах Bambu. Фильтр был изготовлен из доступных мне материалов, таких как болты и магниты, которые были под рукой. На одной из фотографий вы можете видеть детали, которые использовались для создания фильтра.

Важно отметить, что я проектировал все с учетом проклейки всех соединений двухмиллиметровой лентой с целью улучшения изоляции.

Единственное замечание касается отверстий для вентилятора. По какой-то причине QIDI использовала разные размеры отверстий. Сам вентилятор имеет размеры 50x50 мм, в то время как отверстия, сделанные QIDI, имеют размеры 48x50 мм. Я уже связался с компанией QIDI по этому поводу, и они сказали, что возможно исправят эту ошибку. Также стоит отметить, что с этим фильтром нельзя использовать стандартное положение для держателя филамента, поэтому его пришлось модифицировать.

Tags