1 / 2
TronXY X5SA Direct Drive Mount for Stock Extruder Remix — image 1
1 / 2

TronXY X5SA Direct Drive Mount for Stock Extruder Remix

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Remixed version of Dropwire's model without the upper piece for my Tronxy X5SA non-pro.

Rating
0 / 5
Likes
9
Downloads
133
Makes
0
Views
690
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution

I originally printed Dropwire's model without the upper piece for my Tronxy X5SA non-pro and the section for the cable chain mount was too short. This might be due to me buying the printer in Fall of 2021 and the x carriage might have been changed. I stretched it by about 10mm and it fits well now. I used a little longer M4 hardware for the cable chain to move it away from the bowden tube fitting but the stepper motor hardware worked well. You will also need some M3 hardware to secure the bottom of the mount to the x carriage near the 2020 roller wheels. This will also work on the stock extruder assembly but I had a spare metal extruder laying around from my ender 3 so I used that. I removed the filament guide on the top and made a new one on the side of my printer. Check out my page for that model.

Print Settings

Printer:

Tronxy X5SA

Supports:

No

Resolution:

0.2

Infill:

30%

Filament: Overture PETG

Notes:

Set Walls, Top and bottom layers to 6 for strength. Also might need to drill out the cable chain mount holes to 4.5mm or so to get better fitment.

Category: 3D Printer Extruders

Tags