1 / 6
1/4 Scale  Rheinmetall-Borsig MG131 13mm Machine Gun set, for model FW190 — image 1
1 / 6

1/4 Scale Rheinmetall-Borsig MG131 13mm Machine Gun set, for model FW190

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

This is a quarter scale model of a MG131 machine gun set, with mount.

Rating
0 / 5
Likes
37
Downloads
344
Makes
1
Views
1,611
Reviews
0

Updated at source:

Model information

Category
Other Ideas
License
Creative Commons — Attribution — Noncommercial

This is a 25%, or quarter scale model of a set of MG131 machine guns, with mount and feed chutes.  I designed this for a friend, who was building a scale RC FW190.  

 

Most of the parts will print fine without supports, but the mount will require them.  The gun receivers and barrels print in halves, which must be glued together.  Afterward, the guns and feed chutes need to be glued to the mount.  I used superglue, and it worked great.

Depending on how well calibrated your printer is, you may need to scale the dowels up or down slightly to get a good fit.  I designed them with very little clearance, to require almost a press fit.

PrusaSlicers organic supports worked very well on the gun mount.