1 / 5
OnGuard U-lock's fastening system replacement part
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Did the mounting system of your trusty OnGuard lock break? Don't worry, with this part, you can repair it.
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 54
- Makes
- 0
- Views
- 501
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Mechanical Parts
- License
- Creative Commons — Public Domain
The model is the OnGuard U-Lock (sold with a cable) with the following dimensions: 115mm x 230mm x 13mm.
Retrieve the bolts and rubber from the broken part and install it on the new one. Screw the system. That's it !
You can see my assembly video here : video
3D PRINTING SETTINGS
Nozzle : 0.4
Layer height : 0,20 mm
No supports needed if you enable bridging and respect orientation on the photo.
Infill : The higher the better ! I recommend at least 50%