1 / 4
Bicycle Hydraulic Brake Hose Cutter
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Tool to make a square cuts on bicycle disc brake hydraulic hoses
- Rating
- 4.6 / 5
- Likes
- 47
- Downloads
- 232
- Makes
- 5
- Views
- 1,329
- Reviews
- 5
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- Creative Commons — Attribution
A simple cutter to get a square cut on bicycle hydraulic brake hose.
Items needed:
- 1x X-Acto X11 Knife Blade
- 3x M3x6mm Socket Head Cap Screws
- 1x 4mm OD x 35mm long x 0.4mm thick compression spring (a spring from a disassembled clicky pen may work also)
Assembly:
- Insert the blade in the bottom holder
- Snap the top holder onto the bottom
- Insert the spring into the hole at the end of the blade holder
- Align the end of the spring into the bottom of the outer body and insert the blade holder into the body. Make sure the blade holder slides freely.
- Attach the top of the body with the 3x M3x6mm SCHS. If the blade holder gets locked down, back off the screws slightly until it moves freely.
Using:
Insert the hydraulic hose through the hole in the body, push the plunger into the body. The hose should have a nice square cut!