Jeep JK Underhood ABS module bracket
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A bracket to make some unused space usable
- Rating
- 0 / 5
- Likes
- 19
- Downloads
- 44
- Makes
- 0
- Views
- 937
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Automotive
- License
- Creative Commons — Attribution — Noncommercial
I made this to reclaim some unused space under the hood for accessories. I mounted an air solenoid and another control box here. It is conveniently right by my air compressor, which is mounted over the brake booster. There is a strangely-shaped plastic bracket here which holds the ABS module and some other wires, but no good place to mount anything to. This mounts on top of that weird bracket and just requires three self-tapping screws (#8 or #10) to secure in place.
Punch some holes in the model in your slicer or CAD program for whatever you want to mount.
Obviously it needs to be printed in ASA or something else with a very high heat tolerance to survive the engine bay temperatures. Print it with the big mounting plate flat on the bed and it will require no supports.