Elegoo Neptune 4/4PRO Cable Chain (New 90deg mount & Z mount to connect chain)
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€1.05 – €1.29 net (excluding VAT)
For file: EN4PRO_90deg_with_chain_female.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €1.17 excluding VAT (range midpoint).
- Weight reported by the author
- 15 g
- Print time reported by the author
- 1.15 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Tried to adjust the Z-mount and 90 degree extruder to fit a wider chain in the X direction.
- Rating
- 4.5 / 5
- Likes
- 400
- Downloads
- 4,978
- Makes
- 15
- Views
- 21,007
- Reviews
- 12
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Share Alike
Tried to adjust the Z-mount and the 90 degree extruder so that another chain can be attached in X-direction.
Unfortunately I only had the STL files available, so there might be small errors in the mesh. Didn't want to re-model the model for a few small changes. Also, because of this, the positioning on the axes is not optimal. I had no problems slicing and printing it.
Also, my SolidWorks license expired, so I had to work with FreeCAD and I'm not used to that yet.
Is my first release and I'm not yet familiar with the upload etc. on Printables so be merciful with me ;)