Baby's First Ab Roller
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€18.81 – €22.99 net (excluding VAT)
For file: The Lazy Boi Download.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €20.90 excluding VAT (range midpoint).
- Weight reported by the author
- 366 g
- Print time reported by the author
- 17.07 hr
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Error 404: Model not found
- Rating
- 0 / 5
- Likes
- 10
- Downloads
- 20
- Makes
- 0
- Views
- 415
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Indoor Sports
- License
- Creative Commons — Attribution
I wanted an ab roller but did not want to buy one because 2 day shipping is way too long! So I decided to print my own ab roller in 2 days and double the price of an ab roller.
That's what we call efficiency me bois.
Yeah, get that 8 pack, yeah, yeah. Gonna show off or break my back on my own failure.
List of un-printable doo-dads:
I supported my local hardware store personally because what else would I do, watch my print like some kind of 3d printer hobbyist? Honestly, who do you think you're talking to.
Skateboard Bearings: https://www.amazon.com/Pack-608-2RS-Ball-Bearing-Skateboards/dp/B07C6FL8TW/ref=sr_1_5?crid=39EXB1072A463&keywords=roller+bearings&qid=1695861938&sprefix=roller+bearings%2Caps%2C195&sr=8-5
In seriousness, print at your own risk, I used lots of perimeters and low infill for speed and strength, the locations for bearings may require some gluing in as I had to mine. Also, it takes a long time to print with a large print surface contact for first layer AND lots of filament. To me (and maybe myself only) it was well worth it. Happy printing![