Smaller Nose Bridges for Decathlon Nabaiji B-FIT Swimming Goggles 500
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
If you can't find a perfect-fitting nose bridge, you can print out a new one in TPU!
- Rating
- 0 / 5
- Likes
- 7
- Downloads
- 104
- Makes
- 0
- Views
- 636
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- Creative Commons — Attribution — Noncommercial
I bought these mirrored Decathlon goggles and they were alright. The L1 nose bridge was closest fit for me but still felt a little wide.
So, I made a simplified functional model of the L1 nose bridge in Fusion 360 and scaled down the overall width (which was 27.64mm) by -2mm and did another @ -4mm.
Both printed out great on first try in TPU on my Bambu Lab P1S. 10-minute print. The -2mm size fit me best. If you want a different width besides -2mm or -4mm, you can hop into the F360 file and adjust the width parameter.
My print settings:
- Overture 95A High Speed TPU
- Orcaslicer 1.7 beta
- Used stock "Bambu TPU 95A" filament profile
- 0.6 nozzle
- 0.18 layer preset but changed"
- Elephant foot comp = 0.15
- Wall loops = 3
- Sparse infill = Gyroid
- Prime tower = Off
- Glue stick on textured PEI plate
Cheers and happy swimming!
