Beer Drip Tray
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A wall mounted drip tray for fridge or wall mounted beer taps.
- Rating
- 5 / 5
- Likes
- 61
- Downloads
- 424
- Makes
- 5
- Views
- 1,797
- Reviews
- 4
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This is my Drip Tray for Fridge Door/Wall mounted beer taps.
This model is relatively small for a drip tray at 200x85mm in order to make printing easy, but I've been using it for while now and am quite happy with the size as you can poor tall glasses without it getting in the way.
The Tray Insert can be printed from ridgid or flexible filament up to you. I've just used PLA for all my parts. The tray clips onto the bracket using 8, 15mm diameter magnets, but you could change the model to use pegs or something. Print the insert and the bracket upside down. I used lots of walls to avoid zigzag fill on the top.
I tek screwed mine to my fridge but you could get some really strong magnets and mount them to the brackets if you wanted.