Wall mount for HT DN50 pipe
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Wall mount for a HT DN50 pipe with space to fit a 100 mm blast gate close to a wall
- Rating
- 0 / 5
- Likes
- 13
- Downloads
- 70
- Makes
- 0
- Views
- 424
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I designed this wall mount for a HT DN50 pipe to have enough space to the wall to fit a 100 mm Blast-Gate.
The mount goes on the bushing side of the pipe. If you want to mount on the pipe diameter i also uploaded a thicker clamp(Schelle_HT_DN50_Rohr.stl).
I used two standard M4 Threaded Inserts from CNC Kitchen(https://www.printables.com/model/482734-threaded-inserts-heat-set-inserts-by-cnc-kitchen) in the main body.
The clamp is screwed on with two DIN 912 M4x16 screws
Filament: extrudr greentec pro (PETG should also be fine)
Print settings:
- orientation: see picture
- layer height: 0.2
- wall loops: 6
- Top/bottom layers: 5
- infill: 30% gyroid
- support: no