License Plate Clip Twinny load Bicycle Rack
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Clip for securing the License Plate on a Twinny Mount Load "Prestige" bicycle rack. - Now improved!
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 27
- Makes
- 0
- Views
- 364
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Mechanical Parts
- License
- Creative Commons — Attribution
What is that?
This part is the clip that secures the license plate in the plate holder of a bicycle rack. The rack is the Twinny Load "Prestige" model that you might find second hand - it is no longer on sale. (There is more precise information in the last picture.)
Why did it break?
It turns out that the original part, which is injection molded, does not survive several license plate changes because it has to be inserted and removed with a screwdriver with each cycle. It breaks where you would expect it to break: at the thinnest part of the geometry.
Redesign
I redesigned the part in FreeCAD. I basically used one sketch from the top and one from the side to carve out the features of this part. A third sketch was used to create the cavity at the bottom (which will be used to remove the part once it is in place).
Improvement/Modification
One version looks identical to the original. However, since it obviously broke during removal, I modified the geometry to make it less "biting" and therefore easier to remove.
The FreeCAD file is also attached and you can play around with the angle in "Sketch001".
Printing
- LP-Holder_Twinny_Bike_Rack_Non-Removable_90Degree.stl
--> Original geometry. Probably just as difficult to remove and prone to breaking - LP-Holder_Twinny_Bike_Rack_Removable_120Degree.stl
--> Modified geometry with less bite.
You will need a little bit of support, but that is fairly easy to remove.