Toyota Car Remote
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
New remote control housing replacement
- Rating
- 5 / 5
- Likes
- 17
- Downloads
- 73
- Makes
- 1
- Views
- 1,643
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Automotive
- License
- Creative Commons — Attribution — Noncommercial
My son's old Toyota Corolla alarm remote control case was falling apart. My solution was to 3D design and print a complete new remote control housing replacement. Here is my design. My design may match your needs, too.
The Toyota logo is created as a separate component, printed in a different coloured filament and glued with epoxy resin onto the engraved main panel.
The top cover is secured to the bottom panel by two secure points, a rear interlocking clip and a M2 x 8.5mm screw. The M2 nut threaded insert is carefully embedded into the bottom panel via a heat source.
My print is made in PETG 1.75mm Aurarum silver and black filaments, with 0.2mm layer height and 100% infill on a PRUSA I3 MK3S printer.
I hope you can find this design useful, too.
Remember to leave me some feedback or even a tip to keep me enthused to make more of these drawings.