SC2 VR Only Fan mount/cover with Shroud
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€4.18 – €5.10 net (excluding VAT)
For file: FanMount_0.15mm_PLA_MK3S_5h13m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €4.64 excluding VAT (range midpoint).
- Weight reported by the author
- 46 g
- Print time reported by the author
- 5.22 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Fan mount/cover with shroud for SC2 Sport or Pro bolt pattern and SimLab vertical Mount.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 10
- Makes
- 0
- Views
- 258
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Toys & Games
- License
- Creative Commons — Attribution
Fan mount/cover with shroud for SC2 Sport or Pro bolt pattern and SimLab vertical Mount.
This is for VR use only as it would certainly be in the way of screens.
This mount uses the long 8mm bolts extending behind the SimLab Vertical Mount and has clearance for that particular mount.
I used this fan:
Noctua NF-A20 PWM chromax.Black.swap, Premium Quiet Fan, 4-Pin (200x30mm, Black)
Also a PWM controller with knob and a 12V power supply.
This also requires 2 3" 1/4 20 hex shoulder bolts and 1/4 20 threaded knobs with a 3/4" base to fit in the hole.
I used wood screws to attach the fan from the back.