1 / 3
Cover for remote control - One For All URC1912
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
The snap-fit of the original cover was broken, so I have designed this spare part.
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 22
- Makes
- 0
- Views
- 344
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial
The cover is printed with flexible filament (Extrudr flex hard). Other materials will also work, but keep in mind the snap-fits are prone to break.
Print instruction:
- supports: YES
- layer height: 0,2mm or 0,3mm
- nozzle diameter: 0,4mm or 0,6mm
- brim: YES (recommended to ensure good adhesion on the print bed)
- enclosure: not required
Assembly instruction:
- remove support, brim and deburr edges if needed
- add cover to remote control