Wago Back to Back 221-412x2 + 221-413x1 Clip
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
M3 screw down mount for a cluster of 2x2way and 1x3way Wago 221s.
- Rating
- 0 / 5
- Likes
- 13
- Downloads
- 63
- Makes
- 0
- Views
- 524
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Share Alike
Use m3 screws mount up enough Wagos to bring single phase mains power into a project box. The three way connector covers connecting the chassis to ground. The mount holes are 27.5mm apart (compatible with the V connector mount holes)
Print with the common edge down, 0.3mm layers, no supports.
If using this with high voltages or current, you should probably print it in something like https://www.prusa3d.com/product/prusament-petg-v0-natural-1kg/ (Bump the size a few percent if you do, that stuff shrinks.)
Though it's pictured with ferrules in use, I can't recommend them, the holder introduces a tiny lip and the ferrule boot/strain relief catches on it. Perhaps a bare ferrule could work if you wanted.