Flatbox V5 Large Enclosure CNC
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
CNC version of https://www.printables.com/model/570481-flatbox-v5-large-enclosure but even bigger
- Rating
- 0 / 5
- Likes
- 7
- Downloads
- 118
- Makes
- 0
- Views
- 1,101
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Video Games
- License
- Creative Commons — Attribution — Noncommercial
CNC version, ordered for JLC PCB but I imaging it'll work with any companies out there.
Follow the direction on https://github.com/jfedor2/flatbox/tree/master/hardware-rev5 for ordering.
The finishe I used was
“Bead blasting-100 mesh + Anodizing-Champagne/Black-Glossy”
Could be a bit nicer, maybe add hand polishing before the bead blasting if you're after a super even finish.
Order was about $120 total, I used the v3 file but realized I forgot to chamfer the holes for the tactile button. Some one let me konw if that added to the cost of manufacturing please!
I used m3x8mm flat heads for the fastener.
And 8mm tall tactile switch for the buttons.
Remember to use the pdf file to indicate threaded holes when ordering.
Thank!