Sama IM01 less air restricted MOD v1.1 (update 25.10.23)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Alternative less restricted look for SAMA IM01
- Rating
- 0 / 5
- Likes
- 7
- Downloads
- 54
- Makes
- 0
- Views
- 1,262
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution — Share Alike
!!! New version is available https://www.printables.com/cs/model/756752-krux-naos-sama-im01-reworked-v2 !!!
This is version is archived only and there will be no more updates. V2 is now active !!!
New panels and fan brackets with better airflow.
Custom panels are only for my fan brackets
Stock panels are for stock fan brackets
My fan brackets works with STOCK and CUSTOM panels.
Print:
Panels are same. You need two of every type.
Fan brackets are two types. You need one middle, one front-rear and one !!!mirrored!!! front-rear
print settings:
You need good calibration for best fit coz tolerances are realy tight!
Dont forget about materia shrinkage. Mine was 0.5%.
Printed with PETG 0.2mm layer, 0.4mm wall, no infill, support only for FAN bracket at outer screw holes. Rotate models on flat side !
Can be used for:
SAMA IM01
Krux Naos
Fortron CST350
Tecware Fusion
and other versions of this case