Brickplates for Cooler Master QUBE500 compatible with LEGO, Bluebrixx, ...
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Brickplates for the QUBE500 from Cooler Master. Compatible with most brick systems like Lego, Bluebrixx, etc, ...
- Rating
- 0 / 5
- Likes
- 11
- Downloads
- 28
- Makes
- 0
- Views
- 437
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Public Domain
Make the most modular computer case even more modular by adding your favourite bricks from Lego, Bluebrixx, etc.
Unleash your creativity!
The model is available in two styles. Regular and with higher airflow (recommended => files with “Air” in file name).
Print instructions:
Layer height: 0.2-0.3mm (except “Base_Foot.stl” => use 0.15mm)
Supports needed (except “Base_Foot.stl”)
(Test prints were made with Extrudr NX2 PLA)
# Front and top panel:
2x Qube500_Brickplate_Air_1.stl
2x Qube500_Brickplate_Air_2.stl
24x Base_Foot.stl
# Side panel:
2x Qube500_Brickplate_Air_1.stl
2x Qube500_Brickplate_Air_2.stl
4x Qube500_Brickplate_Air_3.stl
40x Base_Foot.stl
Assembly instructions:
1.) slide the “Base_Foot” in the cavities on the bottom of the plates
2.) push the panels together (a few bricks on top to secure the plates might be helpful)
3.) click the assembled panel onto the desired side of the Qube 500 case.
Note:
The “Qube500_Brickplate_Air_Small.stl” and “Qube500_Brickplate_Small.stl” models are designed in case you don't want to cover your entire panel. Just for small brick builds ;-)