Scrubbing Bubbles (filament painting)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Scrubbing Bubbles created in Hueforge.
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 22
- Makes
- 0
- Views
- 270
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Wall-mounted
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives
The famous Scrubbing Bubbles mascot of SC Johnson created in Hueforge. This was printed on my Bambu Labs P1P with AMS, but can be done on any FDM printer with the provided color swap instructions below.
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.2mm
Filaments Used:
PLA BambuLab Matte Charcoal Transmission Distance: 0.6
PLA BambuLab Matte Lemon Yellow Transmission Distance: 4
PLA BambuLab Matte Ice Blue Transmission Distance: 3.5
PLA BambuLab Matte Ivory White Transmission Distance: 4
Swap Instructions:
Start with Charcoal
At layer #9 (0.84mm) swap to Lemon Yellow
At layer #11 (1mm) swap to Ice Blue
At layer #18 (1.56mm) swap to Ivory White for the rest.