1 / 1
Insinkerator - Airgap Inlet Flange
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Craced Insinkerator inlet flange from the air gap? No worries this will fix it. Simply glue on with epoxy and clamp.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 16
- Makes
- 0
- Views
- 206
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Kitchen
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a replacement inlet flange for the Insinkerator. If your inlet flange has a crack or was broken off but there's enough left - simply epoxy glue the flange to the remaining inlet and then use hose clamps for the airgap hose drain into the Insinkerator.
No need to replace the entire device.
Print in PETG/ABS - 5 walls 100% infill - clear coat the inside with finger nail polish for additional water proofing