Repair for Jaguar XJR (XJ40) bumpers (broken pegs)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
These pieces replace part of the plastic in the bumpers to add new pegs to be able to mount it to the frame.
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 21
- Makes
- 0
- Views
- 301
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Automotive
- License
- Creative Commons — Attribution — Noncommercial
Description / Why I made it
So this model was made for my brothers car that suffered from a common problem as I understand it.
The side bumpers on the Jaguar XJR (XJ40) have pegs molded into the plastic and these are supposed to fit into a slot holding it all together when mounted onto the frame.
When these pegs break off due to wear or the plastic becoming brittle you can have a hard time finding a replacement so I wanted to fix the original parts.
To repair the bumpers it would need something stronger than just gluing new pegs to the existing walls so I came up with this design.
The design is made to be split and later screwed together to both make printing easier and it lets you glue the bottom part down if you want while still allowing replacement of top part.
I have included both split and original .stl files as well as .3mf, just mirror the parts for the other side.
Please note that there are different revisions of this bumper and this design is made for version with 1 support wall not 3.
You can find a picture showing both versions among the uploaded photos.
I am sure you can easily adopt this to fit the other version and this might make for a good starting point for you.
Printing
This is an easy model to print, use the split model if you want and use a little support material under the peg and you should be good to go.
I made this in PETG and used 3 outer walls with 30-40% infill (maybe overkill but thats my style)
Assembling
After printing the parts you will need some M4 brass inserts, washers as well as screws to assemble it.
The brass inserts are inserted using a soldering iron on the top of the bottom parts.
Start with the bottom parts which you screw onto the support wall behind the pegs, drill a 4mm hole and screw it together.
Now cut off the plastic wall that the original peg sat on and make sure to cut it flush with the top of the parts you just screwed down.
When done you just screw down the top part onto the bottom to replace part of the wall and add a new peg.
This design worked well for us and hopefully will be strong enough for many years to come.
Happy printing!