1 / 5
Blast Gate 2" / Sperrschieber HT50, remix for M4 screws/nuts
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Remix of Blast Gate 2" / Sperrschieber HT50 for M4 screws/nuts + extended pipe length with chamfer + lettering "OPEN"
- Rating
- 5 / 5
- Likes
- 18
- Downloads
- 116
- Makes
- 2
- Views
- 786
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I used the original “SPACER” for assembly with four DIN 912 M4x16mm screws and four M4 lock nuts.
The original “SCHIEBER” can be used.
Filament: extrudr greentec pro (or as the original PETG)
Print settings:
- Layer height: 0.2
- Wall loops: 5
- Top/Bottom layers: 5
- infill: 15 % rectilinear
- support: no