Console for handheld RC transmitters
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€0.75 – €0.92 net (excluding VAT)
For file: 09_Sender_Halter_v02_teil_09_Ender3_PETG_233.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.84 excluding VAT (range midpoint).
- Weight reported by the author
- 10 g
- Print time reported by the author
- 53.4 min
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
3D printed transmitter console
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 34
- Makes
- 0
- Views
- 408
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- RC & Robotics
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Transmitter console
The transmitter console consists of several 3D printed parts that are glued together with epoxy resin.
It is made to be used with a variety of handheld transmitters. With an optional extension, the console can be adapted to different transmitter shapes and sizes.
n addition to the 3D printed parts, you also need two aluminum rods, round magnets and some screws.
Printing instructions
The individual parts should be printed from PETG, which has significantly higher thermal stability than PLA.
They are made for a layer height of 0,25mm and a 0,4mm nozzle.
When designing and printing the parts for my RC flight models, I use PrusaSlicer, which can be downloaded from https://www.prusa3d.de/prusaslicer/, to realize special desired properties for 3D printed parts. These properties (e.g. adhesive surfaces or internal support structures) cannot be achieved at all or only with great difficulty using a CAD program alone.
I do not provide stl-files, but 3mf-files for download. If you still need stl files, I made a short vido on YouTube how stl files can be exported in PrusaSlicer.
Building instructions
I have made detailled building instructions for the transmitter console on my website:
https://c-arts-modelle.de/carts_modelle_web/fluggeraete/carts_senderpult/carts_senderpult_engl.html
There is also a step by step build video on YouTube: