Bambu Lab Mouse Pad with Logo for Wireless Mouse 002
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Mouse Pad with Bambu Lab Logo
- Rating
- 0 / 5
- Likes
- 22
- Downloads
- 159
- Makes
- 0
- Views
- 2,095
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Office
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Hello Everyone
I am sharing a Mouse Pad with the Bambu Lab logo. I designed it especially for Bambu Lab Wireless Mouse 002. The Mouse Pad has dimensions of 225 x 210 x 3mm. This is the maximum size I could get with color printing to the X1-C printer. For me the size is completely sufficient. The Mouse Pad on the bottom has space for 5 anti-slip silicone pads. Each printer has a different table curvature, so at the beginning you should only install 4 anti-slip silicone pads on the corners, and if this is insufficient, only in the next step, install the 5th pad in the middle. The diameter of the silicone anti-slip pad used is 8mm and the height is 2.5mm. This prevents the mouse pad from moving around on the desk. You can buy them in any large DIY store or furniture accessories store for about 1.50 euros for 50 pieces. You can download the STL file that needs to be colored or the 3MF file that is ready to print and is in color - Recommended (Just change the filament to Your color)
When you complete the project, please share a photo and a comment. Thank you and have a nice day.
How to print ? :
- Plate : Textured Pei
- Material : Any
- Layer Height : 0.2mm
- Infill : 20%
- Wall Loops : 2
- Top Shell Layers : 4
- Bottom Shell Layers : 4
- Flow Calibration : No
- Support : No
- Brim : No
- Brim Auto : No (Be sure to disable Brim Auto. When printing in color with Brim Auto on, it may cause a problem on the first layer)