1 / 3
Wandering Towers Glue Jig
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A simple cup shaped jig to make gluing the Wandering Towers model quick and easy.
- Rating
- 5 / 5
- Likes
- 8
- Downloads
- 153
- Makes
- 2
- Views
- 533
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Board Games
- License
- Creative Commons — Attribution
This is a simple cup shaped jig to position the base and top of towers of the wonderful Wandering Towers model when gluing the top to the base. Place the base into the cup so the central cylinder aligns it, put glue on the top edge of the tower base, then press the tower top in place while the outer wall aligns it. Easy.
The Wandering Towers model is found here: https://www.printables.com/model/476280-the-wandering-tower-die-wandelnden-turme-upgraded-
This jig was designed using OpenSCAD.