Pumpkin meets Skull (HueForge)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Filament painted using HueForge software, printed with 4 colors PLA. No AMS or MMU required.
- Rating
- 5 / 5
- Likes
- 24
- Downloads
- 61
- Makes
- 1
- Views
- 324
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- 2D Plates & Logos
- License
- Creative Commons — Attribution — Share Alike
I stopped uploading and updating my models here at Printables!
My actual models can be found on my MakerWorld profile – with print profiles.
Take care to use the newest models …
You need 4 filaments to print/paint: black, orange, yellow and white. You just have to swap the filament 3 times, so no AMS or MMU required.
I used Bambu Lab Filament, but other brands will work, too.
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm.
Filaments Used:
PLA BambuLab Basic Black Transmission Distance: 0.6
PLA BambuLab Basic Orange Transmission Distance: 10
PLA BambuLab Basic Yellow Transmission Distance: 6
PLA BambuLab Basic Jade White Transmission Distance: 4
Swap Instructions:
Start with Black
At layer #8 (0.72mm) swap to Orange
At layer #24 (2mm) swap to Yellow
At layer #28 (2.32mm) swap to White for the rest.
Generated using the HueForge software! See videos with instructions for filament swaps with Bambu Studio and PrusaSlicer …
… or try the included .3mf file.