Replacement door handle for a balcony door
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€0.93 – €1.14 net (excluding VAT)
For file: DoorHandleComplete_0.2mm_PLA_MINI_1h5m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €1.03 excluding VAT (range midpoint).
- Weight reported by the author
- 12 g
- Print time reported by the author
- 1.08 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Replacement door handle for a balcony door. Manufacturer SRB, Inovatec and others
- Rating
- 5 / 5
- Likes
- 6
- Downloads
- 51
- Makes
- 1
- Views
- 253
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor & Garden
- License
- Creative Commons — Attribution
Balcony door handles are manufactured by several different companies. The dimensions are usually identical. Examples of companies include SRB, Inovatec (Part-Number: L120604) and so on.
The balcony door handle consists of two parts in total: the handle itself and an invisible fastening component. It may happen that one of these two parts gets damaged or breaks. In such cases, using the provided 3D printing files, either the handle itself or the fastening component can be printed. An undamaged original part can be reused, as shown in the pictures.
To install it, you can follow the instructions below:
First demount the damaged or broken fastening component. If this original part is fine, you can skip this step. Afterwards you can mount the freshly printed fastening component with the original screws. Don't use too much force. The result looks like this.
One you installed the fastening component you can simply slide the handle on it from right to left. If this does not work at all, you can loosen the screws a bit. you can either use the original part or the replacement handle. Both are interchangeable.
