Printable RC Track Connectors for 44MM ID / 50MM OD Square Tube
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Designed to fit 44mm ID 50mm OD square tube used for CRC Click Track boards
- Rating
- 5 / 5
- Likes
- 18
- Downloads
- 135
- Makes
- 1
- Views
- 1,461
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- RC & Robotics
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
-These parts were designed to fit 44mm ID 50mm OD square tube with 10.2mm button hole 75mm back from the face of the board.
-The button cartridge is designed to work with 1" long ¼ diameter spring like the Prime-Line SP 9701 Spring and a 30mm M3 cap head screw to hold the cartridge to the track parts and keep the bottom of the cartridge on.
-Cartridge parts should be printed with 100% infill
-All track connectors work best printed in TPU with at least 2.6mm wall thicknesses and were designed to be printed with a 0.6mm nozzle. No supports required.
-Added Left and Right Hand Flex Corner Connectors to use with HDPE strips cut to 1.5" tall. I suggest using 3/16" thick strips up to 4 feet long and ¼" for anything longer than that. There is one section of the part that will require supports.
You will need to print 2 flex corner cartridges and use 4 35mm long M5 flat head screws and 4 M5 lock nuts per corner end. One standard button cartridge per end is also required.
There is a shim that can be printed to fill the gap between the corner part and the HDPE if using thinner than ¼". One shim for 3/16" and two Shims for 1/8".
Please review images