1 / 5
Ghost Booh Vase Mode for Halloween decoration — image 1
1 / 5

Ghost Booh Vase Mode for Halloween decoration

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Remixed it to be printed in vase mode and with eye inlets in different color.

Rating
4.833 / 5
Likes
178
Downloads
1,229
Makes
14
Views
3,809
Reviews
12

Updated at source:

Model information

License
Creative Commons — Attribution

t chI remixed the cute Ghost Booh from BODY3D to be printed in vase mode.

With this printing method you have a nice finish and a fast print. It took on my stock CR-10 V2 only little more than 2 hours and 23g of filament.

You have a model to be printed in one color (…_single) and one for eye inlets which can be printed in different color.

At vase mode prints i recommend to use a bigger line width. With a 0.4 nozzle you can print up to 0.8mm line width, you only have to increase the temperature a bit and maybe reduce the Speed.  It  is  important to focus on the top view in your slicer that You have no open gaps.  

I printed it with 0.08 layer height and Sunlu white PETG, because it is more like a bit transparent because of less color particles and looks maybe better when illuminated. The eye inlets are Orange Prusament PETG and printed at 95% that there is a gap for some glue.

You can drill a hole at the top to hang it in the air with some fiber string for the best look like i did 😉 Additionally I illuminated it with UV-light on the amazing flying pictures!

In Cura it tells me that the models are not watertight, but i could not see any problem and also repairing the model did not changed anything, but it printed find… 😉

Would be happy to see your makes!

Tags