HueForge Shiny Cramorant clock
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Shiny Cramorant clock based on the Japanese promo card From the stamp box. Made with HueForge
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 22
- Makes
- 0
- Views
- 363
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Wall-mounted
- License
- Creative Commons — Attribution — Noncommercial
Filaments Used:
PLA BambuLab Matte Charcoal Transmission Distance: 0.6
PLA BambuLab Matte Lemon Yellow Transmission Distance: 4
PLA BambuLab Matte Ivory White Transmission Distance: 4
PLA BambuLab Matte Scarlet Red Transmission Distance: 2
Swap Instructions:
Start with Charcoal
At layer #4 (0.4mm) swap to Lemon Yellow
At layer #9 (0.8mm) swap to Charcoal
At layer #16 (1.36mm) swap to Ivory White
At layer #17 (1.44mm) swap to Scarlet Red
At layer #19 (1.6mm) swap to Lemon Yellow
At layer #21 (1.76mm) swap to Ivory White.
At layer #23 (1.76mm) swap to Charcoal for the rest.
The clockwork that was used in this project is: https://www.amazon.nl/dp/B09S3B67VW?psc=1&ref=ppx_yo2ov_dt_b_product_details .
Frame for this clock: https://www.printables.com/model/600624-frame-for-the-shiny-cramorant-clock
Simple stand: https://www.printables.com/model/600628-simple-stand-for-clock
You will have to make a cutout for the clock mechanism. I used a negative cilinder with a diameter of 9 mm. If you have a Bambu Lab printer and download the 3mf file, it should already have this (as well as the color changes). You can still adjust the diameter if you use a different clock mechanism.