Camera mount with screw for UNC 1/4" e.g. C920 / Kamerahalter mit Schraube für UNC 1/4" z.B. C920
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Camera mount with screw fits all cameras with UNC 1/4" base thread. / Kamerahalter mit Schraube passt für alle Kameras
- Rating
- 0 / 5
- Likes
- 12
- Downloads
- 68
- Makes
- 0
- Views
- 482
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Prusa Parts & Upgrades
- License
- GNU Lesser General Public License
Compact camera mount with screw for UNC 1/4". This fits all cameras with UNC 1/4" thread like Logitech C920, Lenovo 500 FHD or similar.
Dimensions holder:
Width 155.12 mm
height 65,00 mm
Depth 51,66 mm
Dimensions screw:
Diameter 25.00 mm
Height 69,00 mm
Durck:
PETG, but PLA should work as well.
No support needed.
For mounting to the frame I used 2x T-nuts from Buggi with a M4x10 Allen screw.
The cable of the camera I have led with the clips from me on the frame to the back.
Happy printing!
If you like the thing leave a like or post a make. I'm always open to suggestions for improvements or changes.
__________
Kompakter Kamerahalter mit Schraube für UNC 1/4". Dieser passt für alle Kameras mit UNC 1/4"-Gewinde wie z.B. Logitech C920, Lenovo 500 FHD o.ä.
Abmessungen Halter:
Breite 155,12 mm
Höhe 65,00 mm
Tiefe 51,66 mm
Abmessungen Schraube:
Durchmesser 25,00 mm
Höhe 69,00 mm
Durck:
PETG, PLA sollte aber ebenfalls funktionieren.
Kein Support benötigt.
Für die Befestigung am Rahmen habe ich 2x T-Nuss von Buggi mit einer M4x10 Innensechskantschraube verwendet.
Das Kabel der Kamera habe ich mit den Clips vom mir am Rahmen nach hinten geführt.
Frohes Drucken!
Wenn euch das Ding gefällt lasst ein Like da oder postet ein Make. Für Verbesserungs- oder Änderungsvorschläge bin ich immer offen.