Bath Bomb Mould Micro Multi Press Emoji Smiles
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Finished Embed Size - 2.5cm Round The height on these will vary considerably with how much mix you put into the cavities
- Rating
- 0 / 5
- Likes
- 1
- Makes
- 0
- Views
- 128
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Bathroom
3D MODEL DESCRIPTION
Mould - 8cm tall x 13cm at widest side measurement x 3.2cm deep
Finished Embed Size - 2.5cm Round The height on these will vary considerably with how much mix you put into the cavities. This helps flexibility for different sizes of moulds and needs.
How to Use: lay the thinnest/smallest Base part on the bench. Connect the tube with orientation so it sits over the hearts/connects.
Fill with bath bomb mix to the top (this can be adjusted for how tall you wish them to be).
Press down with the tube into the cavity to compress the mix. This does not need to be full body weight etc, light pressure is fine.
Lift the tube and press part free from the base, Moving it to the drying area.
Press down the tube to pop the bath bombs out the bottom.