Vase jar - round textured (threaded, parametric)

This model is a part of Vase Jar “system” - few models I created that are inter compatible. Available:

• base square model LINK 
• round plain model LINK
• Halloween style model LINK
• solid lid for all models LINK

Note: In order not to upload the same models/files again lids are available in base model - see link above.

I give you a parametric jar/container. This time round textured one. It has a threaded lid - both to be printed vase mode. This model is quick to print and it requires very little filament - 100x100x100mm version is just 45g for both jar and lid.

Size guide:

• bottom of all jars is round
• folders in downloads are sorted by bottom size with different heights

Following sizes are available in download section:

• 50mm
• 75mm
• 100mm
• 125mm
• 150mm

Note: bigger sizes would most probably require higher extrusion width for strength.

Printing:

• enable vase mode in your slicer
• 3-4 bottom layers
• my models were printed with 0.6mm nozzle and all threads fit, tolerances are fine
• PETG is suggested to print jars and lids due to its greater flexibility

Parametric modification:

If provided files does not fit your needs please have a look at included fusion360 file. There are three parameters to modify:

• boxw - bottom size
• boxh and boxtop - both of those parameters sum up to total height of the jar. First one defines bottom part and second the head. Please set the top one so that bottom of thread has  2-3mm space below
• sidewall_cuts - default value used for models is 14. Adjust to your liking.
• sidewall_angle - higher value sharper angle. Models are prepared with 0.5 parameter. There is a model with parameter set to 1 in 100mm section in downloads - for reference.

Let me know how it works for you. Happy printing!