1 / 2
TS100/Pinecil stand
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Easier to put in and out and ballast area added.
- Rating
- 5 / 5
- Likes
- 49
- Downloads
- 112
- Makes
- 1
- Views
- 1,662
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Share Alike
My take for the remix of popular soldering iron stand.
Inspired by JBC stations, I added a silicone wipe to wipe off any sticking components etc.
There are 2 parts
- Main
- Lid - lid for the ballast area
The print itselfis generally pretty light, so you can put some nuts or steel balls in the body and glue the lid on to make it more hefty.
Instructions
- 2mm diameter wire (not copper)
- I used welding wire from local HW store, but any will do. Bend it to the shape and slide to the holes.
- In my case, no glue was needed to secure it.
- I recommend drawing a support mid, through ballast area container.
- File with already drawn support is also attached.
